Deltron D837

D837 DX330 Spirit Wipe is a mild blend of solvents for removing light contamination on small areas of bare metals as a step in the preparatory process. Application: Apply generous quantities of Deltron Cleaner to a clean cloth. Wipe surfaces to be cleaned before and after sanding. Wipe surfaces in once direction only, to prevent smearing of contaminants. After using, […]

Deltron D8120

Deltron D8120 High Solids Clear is a premium quality high solids polyurethane clearcoat specifically formulated to give optimum gloss and durability when low-baked. It is designed for the repair and respray of motor vehicles as part of a basecoat/clearcoat repair process. The performance of Deltron D8120 in a recommended PPG repair system meets or exceeds motor manufacturer warranty requirements and […]

Deltron D8122

D8122 Ceramiclear scratch and mar resistent clearcoat is optimised for use over ENVIROBASE® High Performance waterborne basecoat. Through the use of patented nanoparticle-technology, D8122 Ceramiclear scratch and mar resistent has been optimized to achieve a balance of ease of use and scratch resistance without compromising on fade out and polishing characteristics.   Packaging: 5 Liters

Deltron D8112

Deltron D8112 – HP (High Performance) Clearcoat is a premium quality High Solids polyurethane clearcoat specifically formulated to give an optimum cure while retaining excellent gloss and durability when low-baked for 15 minutes. D8112 – HP can be used in a single visit or a conventional 2 coat mode. By utilizing the single visit mode and 15 minute low bake […]

EHP D8401

D8401 Waterborne Low VOC Cleaner is designed to remove salts, finger prints, tree sap, wet flatting marks and any other water based contaminant agents that can cause application problems. After use of the degreaser, remove with a clean, dry cleaner any excesses. Do not let dry the product on the clean surface.

D8046

Global Refinish System D8046 is a versatile, high build 2K primer, suitable for use under Deltron UHS Direct Gloss topcoats. It offers exceptional film build when used as a spray filler or primer surfacer. D8046 may be applied over suitably prepared knifing putties, or over sound, fully cured, original paintwork, or adhesion primers. Options are available for air drying, and […]

P551-1823

The PPG range of putties and stoppers have multi substrate capability with excellent application to give a smooth finish free of pin holes. The products can be used for filling both large, deep surface irregularities and small repairs.

Deltron D820

The PPG Plastic Painting System gives a range of products for the successful refinishing of all paintable plastic substrates*, from cleaning and preparation through to texturing and top coating. D820 Plastic Adhesion Promoter is a fast, transparent 1 pack primer suitable for use on the vast majority if paintable plastic substrates and avoids the need to identify the plastic prior […]

Deltron D834

D834 is a versatile 2K Epoxy Surfacer. It is light grey in colour, chromate-free and has good corrosion resistance over bare metal. D834 has good adhesion to a wide variety of suitably prepared substrates. These include bare and galvanised steel, aluminium, GRP and fibreglass, painted surfaces and fillers, and a wide range of plastic substrates. D834 is ideally used as […]